Homepage Badaga Community Forum Index FAQ Search Usergroups Profile Log in to check your private messages Log in Register
Badaga Community
Welcome to Badaga community forum
View next topic
View previous topic
Post new topic Reply to topic
Author Message
andik_bellie
Occasional poster


Joined: 22 Apr 2002
Posts: 32

PostPosted: Wed Jun 10, 2009 2:53 am Reply with quoteBack to top

Just check it up, if interested. Got this through one of my friend.

Forward to your friends and if any one interested please send your resume to
rskanth@juniper.net <mailto:rskanth@juniper.net> only!!


1) DiffServ/QoS Engineer (Member Technical Staff)

Develop systems and networking software for QoS and DiffServ.

Requires in-depth knowledge of and previous experience with distributed
operating systems (preferably UNIX), IPC mechanisms, I/O subsystems and
hardware interfaces.

A thorough understanding of QoS concepts such as classification,
rate-limiting, shaping, prioritization, queuing, congestion management is
required. Experience with hardware implementations of the above schemes is
required.

Experience in traffic management and traffic engineering a strong plus.
Thorough understanding of queuing theory and strong analytical skills
required.

Must have hands on experience in IP QoS architectures such as diffserv and
intserv. Systems / Network programming experience in C or C++ required.

5+ years of development experience with B.S. or M.S. in computer science or
engineering and experience in real-time, embedded software development in
the area of QoS, DiffServ, or RSVP



2) Microcode Engineer (Member Technical Staff)

Design and develop microcode and drivers for Network Processor:

The candidate must have an extremely strong programming background with
expertise in Microcode programming and Device Driver development.

Hands on development experience with "Mindspeed network processor" is highly
desirable.

A good networking background particularly in the technology areas like
Ethernet & ATM is highly desirable.

The candidate must have strong analytical skills, good communications and
documentation skills and the ability to work well in a dynamic group
environment.

Experience with carrying out projects through complete life cycle including
design, development, documentation, unit/integration testing and sustaining
work is desired.

5+ years of development experience with BS in CS or equivalent and
applicable software experience



3) Senior Technical Lead in Layer-2 Bundling Services (Member Technical
Staff / Staff Engineer)

Senior engineering position to take a lead role in design and development
work

In-depth experience required in the following areas:

Data forwarding in MLPPP/MLFR ( FRF.15 and FRF.16) PPP ( Forwarding and
Control) UNIX internals and systems software expertise in developing modular
software for networking equipment; Strong C, system design, and debugging
skills. Experience with shared memory multiprocessor systems is an added
advantage,Technical leadership is a plus. Strong problem-solving and
communication skills required, with ability to work harmoniously in a
dynamic group.

8+ years of development experience with B.E/M.E. or equivalent in Computer
Science or Electronics.



4) Packet Forwarding Engineer (Member Technical Staff)

Prior work experience in any one of the fields: IP, MPLS, L2/L3 forwarding,
Firewall, ACL, VPLS, MVPN, Multicast, QOS, COS, ATM, Frame-relay, L2VPN,
L3VPN, PPP, ATCA, SERDES programming

Strong in C coding with Good knowledge of Router/Switch arch.

Experience in design / development of non stop forwarding systems is an
added advantage. Strong oral and written communication skills are essential.


A strong understanding of concepts related to computer architecture, data
structures and programming practices is desirable.

Minimum of 6+ yrs of experience preferably in a router/switch company with a
Bachelor/Masters Degree in Electrical Engineering or Computer Science



5) Interface Engineer (Member Technical Staff)

Prior work experience in writing embedded OR kernel device drivers for
Ethernet, SONET/SDH, DS3, DS1, T1/E1.

Experience in at least one of the following is a MUST:

o PPP, Cisco-HDLC, ML-FR, ML-PPP, RPR (sonet ring), STP, RSTP.

Bring-up of networking hardware (pics, linecards) is an added advantage.
Strong in C coding and debugging skills.

6+ years of relevant experience with a Bachelor/Masters Degree in Electrical
Engineering or Computer Science



6) Platform Engineer (Member Technical Staff)
Prior work experience in the field of Chassis/Interface mgt software.
Diagnostics experience would be a big advantage.

Hands-on in UNIX operating systems and UNIX networking stack with good
knowledge of Router/Switch arch.
Prior work experience in any one of the fields:
- IP, MPLS, L2/L3 forwarding, Firewall, ACL, VPLS, MVPN, Multicast, QOS,
COS, ATM, Frame-relay, L2VPN, L3VPN, PPP, ATCA, SERDES programming and
strong in C coding
Experience in design / development of non stop forwarding systems is an
added advantage. Strong oral and written communication skills are essential.

A strong understanding of concepts related to computer architecture, data
structures and programming practices is desirable.
6+ yrs of experience preferably in a router/switch company with
Bachelor/Masters Degree in Electrical Engineering or Computer Science.
View user's profileSend private message
Display posts from previous:       
Post new topic Reply to topic

View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB All times are GMT - 7 Hours